Exterior Lighting Schemes, Looking to see lighting on the front end of your Celica at night Options

[Selly_Kuhman]

Since the front end of the Celica has many potential options on how to set up the lighting scheme, I was curious to see how they look at night. There's an idea I have (for the gt4 front end), but may need help on what wires/harnesses/bulbs to buy in order to set it up.

This post has been edited by Selly_Kuhman: Nov 7, 2014 - 9:25 PM

[Selly_Kuhman]

Not all at once now! Well here's what I am looking to do. I couldn't find any pics which would have helped explain a bit easier...but here goes. I have a 95' GT, with GT4 Front end(not yet put on)Let me know how this would work using the JDM Projectors and clear front indicators.

Low Beams - Headlights (HID)- H1
Low Beams Accent Slot - Blinkers (LED) - 1157?
Front Indicators - Headlights (LED) - ?
Fog Lights - Fog Light Kit - Separate switch -
Side Markers - Disabled -
High Beams - Normal set up -

Basically I want the front indicators to be a second set of headlights that come on when I turn the low beams on. Along with the turn signals put within the low beam projectors. Also the bulb types would be very helpful if you know them.

This post has been edited by Selly_Kuhman: Nov 7, 2014 - 9:22 PM

[Noahwhite2014]

Not all at once now! Well here's what I am looking to do. I couldn't find any pics which would have helped explain a bit easier...but here goes. I have a 95' GT, with GT4 Front end(not yet put on)Let me know how this would work using the JDM Projectors and clear front indicators.

Low Beams - Headlights (HID)- H1
Low Beams Accent Slot - Blinkers (LED) - 1157?
Front Indicators - Headlights (LED) - ?
Fog Lights - Fog Light Kit - Separate switch -
Side Markers - Disabled -
High Beams - Normal set up -

Basically I want the front indicators to be a second set of headlights that come on when I turn the low beams on. Along with the turn signals put within the low beam projectors. Also the bulb types would be very helpful if you know them.

So what I gather is you want LED strip headlights in the corner (turn signal) spot along with HID projectors in the usual low beam spot.

You want your turn signals in the accent lighting bulb hole of the jdm projectors.

Fogs in the usual spot on a gt4

High beams same as before.

Is this correct? I can create a mock up of that when I get home in Photoshop. But one thing about the accent light in the housing, it needs to be REALLY bright or you won't see it much. You could, instead of getting jdm projectors, you could do a retrofit of a bullet or Gatling shroud with a halo and also Amber/white switchback LEDS, the projector assembly can be picked up from TRS (the retrofit source for a reasonable price). Clear lenses from ebay, and the whole project should cost under $300 not including any wire harness adapters that have to be made and xenon bulbs/ballasts

Edit: if this is what you want a mock up of let me know so i can start it

This post has been edited by Noahwhite2014: Nov 11, 2014 - 4:56 AM