 Cluster lights and dimmer not working |
 Dec 6, 2014 - 4:40 AM
|
 
|
|
Enthusiast  Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%)  |
Just a quick question all, replaced my old cluster globes for LED's in my st204, but only the tacho is working and the dimmer for the dash lights is not working either (stays the same brightness). Any suggestions from the electrically inclined, would be greatly appreciated
|
 |
Replies
|
Dec 6, 2014 - 7:02 PM
|
|
|
Enthusiast Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%) |
Much appreciated, I rotated 180 and LED's now work, checked the dimmer again and you are correct Noah, works with normal globes but not with the LED's, but fortunately the lighting is at a good spot, so I'm lucky there. Also I found that rebending the earth contacts on the plug helped as well and a gave them better contact with the plastic board. Thanks again for the replies
J This post has been edited by Justin73: Dec 6, 2014 - 7:05 PM |
Posts in this topic
Justin73 Cluster lights and dimmer not working Dec 6, 2014 - 4:40 AM
The_enD Unplug the sockets with non working LEDs, rotate 1... Dec 6, 2014 - 5:06 AM Noahwhite2014 QUOTE (Justin73 @ Dec 6, 2014 - 4:40... Dec 6, 2014 - 5:37 AM
Noahwhite2014 QUOTE (Justin73 @ Dec 6, 2014 - 7:02... Dec 6, 2014 - 10:38 PM The_enD Yeah, bending the contacts helps, you can also put... Dec 6, 2014 - 7:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 29th, 2025 - 4:30 PM |