![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Oct 31, '02 From grants pass oregon Currently Offline Reputation: 8 (100%) ![]() |
hey rlan214 any time you feel a hole you must first remove the paint a couple of inches all the way around the hole and then use a low temp mig welder. if its a small hole it will only need a spot weld. if it is a large hole such as a radio anttena then you have to cut a piece of sheet metal slightly bigger than the hole and tape it to the backside of whatever it is your feeling and then weld the outside of it. after you are done welding it just take a grinder to it and knock the weld down then you can use your bondo to fill the grinder marks, prime ,paint and your done. if any of you have any ?s regarding body work or paint send me a pm.
|
![]() ![]() |
Lo-Fi Version | Time is now: September 7th, 2025 - 11:06 AM |