FS: 5SFTE/3SGTE Turbo parts, Almost everything you need to turbo a 5SFE. Options

[SpardaXVII]

I've been collecting all these parts for a long time now, but sadly I have to sell all of them. Someone crashed into my celi and it was written off
I have almost everything that's needed to turbo a 5sfe here for sale. I have never had the chance to use any of these parts, all the used parts for sale have been bought from the users of this forum.
I'm not in any rush to sell these parts, if you're interested send me a PM and I'll try to respond as quickly as possible.
I am open to offers, if you don't feel my prices are fair we can try to work something out.
Also if you would like any more pictures or details let me know.

Brand new parts, never used.
EMSpowered 3sgte downpipe all gaskets/bolts included : $125
AEM Air Fuel ratio wideband(comes with O2 sensor): $200
CRX Racing Intercooler 2.25" Outlets, comes with clamps and hoses: $125

Used parts, next 4 items purchased from pressure2 from his 5sfte project.
3SGTE exhaust manifold (EGT sensor hole): $75
5SFE Oil pan with oil bung: SOLD
CT-26 Oil lines with T-line for oil pressure sensor: SOLD
3SGTE Heat shield: $25
3SGTE 2bar map sensor(pictured with clamps and hoses): SOLD
CT-26 twin entry turbo(very minimal shaft play): $250
7MGE 315cc MK3 supra injectors: $125
Greddy Type S Blow off Valve: $100
5x 2.25" hoses 10x 2.25" T-Clamps: SOLD















This post has been edited by SpardaXVII: Aug 19, 2014 - 11:55 AM

[presure2]

free bump for some of my old 5sfte parts!! the downpipe (was not mine) is made for a gen2 and will fit gen3 with the removal of one stud on the exhaust housing of the 20b.
oil pan is from 90-93 alltrac, bolts straight on to the 5s.
oil feed and return line are plug and play with that oil pan, and connects right to the head at the oil pressure switch location.
exhaust manifold is drilled and tapped for a EGT sensor, 1/8npt plug will seal it right up IIRC.

Good luck with the sale!