FS: Parting out 1994 Celica GT, I'm selling what's left of my car Options

[antoine64]

I'm parting out my 1994 celica GT after it was rear-ended in November. I've taken some parts off it for my new Celica but there's still a bunch of good stuff

-5sfe engine with 133,000 miles on it. ran great for the 5 years I owned the car. Great engine.
-5sp transmission attached to the engine. it's works good but has trouble going down from 5th or 4th to 3rd. no grinding, just won't engage. works fine going up from 2nd to 3rd so I just go 5th to 2nd then back to 3rd with the clutch in when slowing down.

-interior parts

-stock cassette deck

-I also have a cassette and cd changer from a toyota 4runner that needs the stock amp to work.

-rear seat gt sport pattern cloth. a tiny round hole but otherwise great shape.

-sport short shifter taken out of my new Celica

-front passenger seat. driver's seat damaged in the accident.

center console, airbags and sensors, plastics, door panels, etc.. I can sent a picture of the part if you ask.




I live in Juneau Alaska so shipping may be a bit more than you're used to. I can put any part on a barge to Seattle for not too much money.

Let me know what you want and make me an offer!

[RocketScott]

Here's my shopping list:

Wind deflector for the sunroof (thing that pops up when the sunroof is opened)
Drivers side high beam
Passenger side low beam
Front struts

I'm in Tacoma so the slow boat to Seattle would work for me. Don't know if it would be cheaper for everyone but I can pick up in Seattle and reship from here. Would probably only work if you got everything together on one pallet and made one shipment.

[antoine64]

Here's my shopping list:

Wind deflector for the sunroof (thing that pops up when the sunroof is opened)
Drivers side high beam
Passenger side low beam
Front struts

I'm in Tacoma so the slow boat to Seattle would work for me. Don't know if it would be cheaper for everyone but I can pick up in Seattle and reship from here. Would probably only work if you got everything together on one pallet and made one shipment.

This is a good idea for anyone in the Seattle area. barge has a minimum rate of around $78 but you can put a lot of car parts on a pallet for that money.