![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) ![]() |
Hello: All. I got the front and rear splitters for my ST and wondering which is the best way to glue them to the body. The rear ones are OEM and it took a lot of effort to clean out the factory tape. Previously I used the 3M for my side skirt but it did not last more that a few weeks. Any other ideas?
Appreciate the help. Thanks in advance |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 21, '05 From Tacoma, WA Currently Offline Reputation: 7 (100%) ![]() |
Go to your local glass shop and ask for glaziers tape. It comes in a variety of widths.
Make sure everything is super clean before you stick it together. Also, line everything up and then peel the protective backing off. You only get one shot at it. Once that stuff is stuck it won't come unstuck without ruining it. |
![]() ![]() |
Lo-Fi Version | Time is now: April 30th, 2025 - 3:15 PM |