 size of back up lamp switch |
 Mar 10, 2015 - 7:06 PM
|
 
|
|
Enthusiast  Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%)  |
My reverse lights haven't been working since i got the car. Already replaced bulbs, no luck. I have an extra s54 that i can take a switch out of, just need to know what size socket i have to buy
-------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)  I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
 |
Replies
|
Mar 10, 2015 - 10:30 PM
|
|
 Enthusiast Joined Dec 3, '13 From Missourah Currently Offline Reputation: 0 (0%) |
the drain plug on my s54 is a 15/16", which is 24 mm. I went to Sears just to find a 6 point box end to be sure I don't round off my new drain and fill plugs
 http://extension.missouri.edu/webster/wrench-chart.aspx anything bigger is usually the 31mm(or is it 32?) like is used for the spark plug tubes, oil cooler, and axle hub me thinks. -------------------- Bust a Deal; Face the Wheel.
|
Posts in this topic
Arturio55 size of back up lamp switch Mar 10, 2015 - 7:06 PM
Box Measuring tape? Mar 10, 2015 - 7:26 PM
mkernz22 QUOTE (Box @ Mar 10, 2015 - 8:26 PM)... Mar 10, 2015 - 7:34 PM Arturio55 QUOTE (mkernz22 @ Mar 10, 2015 - 8:3... Mar 10, 2015 - 7:54 PM Box Could be 22mm, as that was the size for the fill p... Mar 10, 2015 - 9:28 PM Arturio55 Okay, ive taken off both the fill and drain plug o... Mar 11, 2015 - 12:01 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 18th, 2026 - 12:37 PM |