 spark plug tube removal |
 Apr 3, 2015 - 1:24 PM
|
 
|
 Enthusiast  Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
does anyone know the best way to remove the spark plug tubes i can't seem to get them out and I dont want to break them.
-------------------- |
 |
Replies
|
Apr 4, 2015 - 8:35 AM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
Can't you just lock two nuts against each other and use a wrench?
Heating down the tube with a heat gun would also probably help. This post has been edited by Bitter: Apr 4, 2015 - 8:35 AM -------------------- |
Posts in this topic
doory100 spark plug tube removal Apr 3, 2015 - 1:24 PM
Tigawoods I believe Ive used either vice grips or a pipe wre... Apr 3, 2015 - 1:50 PM doory100 Are they pressed in or do they screw in? Apr 3, 2015 - 2:23 PM doory100 Do they pull up and out or are they screwed in? Apr 3, 2015 - 3:53 PM Smaay first off, why on earth do you want to take them o... Apr 3, 2015 - 8:07 PM doory100 To machine the head and do a port and polish. And ... Apr 3, 2015 - 8:55 PM doory100 so they screw in or are they pressed in?? Apr 4, 2015 - 11:51 AM Bitter I thought they were threaded in at the bottom?
ht... Apr 4, 2015 - 12:32 PM Tigawoods they are threaded at the bottom just as they are a... Apr 5, 2015 - 12:33 AM mi645 There is a special tool that u hammer in the tube ... Apr 5, 2015 - 2:07 AM Smaay i dont think FIPG seals them good enough. too much... Apr 5, 2015 - 10:39 AM doory100 got them out!! they were a pain but they s... Apr 6, 2015 - 8:40 AM
mi645 Good job!! Apr 6, 2015 - 6:15 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 12:37 PM |