![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) ![]() |
Hello: All. I got the front and rear splitters for my ST and wondering which is the best way to glue them to the body. The rear ones are OEM and it took a lot of effort to clean out the factory tape. Previously I used the 3M for my side skirt but it did not last more that a few weeks. Any other ideas?
Appreciate the help. Thanks in advance |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
the 3m or "scotch" brand is just fine, dont spend the extra money to say you bought it from the dealer, like someone else posted, its just 3m brand.
the key is to make sure the surfces your applying the tape to is clean, and preferably almost warm to the touch. when your peeling the tape off the roll, make sure your hands are super clean, the oils from your skin will actually affect the grip of the tape down the road. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: August 5th, 2025 - 9:47 AM |