![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jul 1, '14 From Hawaii Currently Offline Reputation: 3 (100%) ![]() |
So I made a sealed box that takes up the inside of the spare tire well and has a false floor baffle flush with the rear seats in the down position. The volume on the interior is around 2.85 cubic feet and there is cushion foam lining the floor pan in the back. The whole box is bolted down to the spare tire tie down hole and that is also the ground point I'm using for the amp. Here's a picture of it.
![]() Looks great and sounds great, but at certain frequencies I get a buzz from my plastics in the back. I believe it's also buzzing the bumper and license plate bezel (not the license plate itself since it has a rubber "anti vibration" frame. Anyone have a good way to quiet that crap down? Lol |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) ![]() |
Signal to noise ratio and frequency response yo.
![]() 100-200W RMS is plenty when paired with 68-84W RMS or so of the rest of the system. Of course I don't listen to rap or other bass boosted/enhanced music. -------------------- 2001 Miata LS 5-speed
|
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 5:51 PM |