![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jul 1, '14 From Hawaii Currently Offline Reputation: 3 (100%) ![]() |
So I made a sealed box that takes up the inside of the spare tire well and has a false floor baffle flush with the rear seats in the down position. The volume on the interior is around 2.85 cubic feet and there is cushion foam lining the floor pan in the back. The whole box is bolted down to the spare tire tie down hole and that is also the ground point I'm using for the amp. Here's a picture of it.
![]() Looks great and sounds great, but at certain frequencies I get a buzz from my plastics in the back. I believe it's also buzzing the bumper and license plate bezel (not the license plate itself since it has a rubber "anti vibration" frame. Anyone have a good way to quiet that crap down? Lol |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 25, '15 From United States Currently Offline Reputation: 4 (100%) ![]() |
On your first post you never stated you had an amp running them. I was assuming you had them off a stock radio or a after market head unit. This is why I stated the RMS head units supply at 4 ohms. Anything will thump given the power to them. I was thinking how the hell are you thumping off 8 ohm speakers on a stock/after market head unit alone...
|
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 2:26 PM |