 5sfte Fuel System, Help with turbo project |
 Jul 17, 2015 - 9:31 AM
|
 
|
|
Enthusiast  Joined Jul 12, '15 From Iowa Currently Offline Reputation: 1 (100%)  |
Hey, I have read tons of threads and info on the 5sfte project, and I am getting a bit of mixed info. I was wondering if you guys could help me get it straight. Some places say run 315cc injectors, and some say 440cc...not sure if both will work fine, or which ones I should go with??? Also I have seen in a couple places ppl say to upgrade fuel pump to walbro 255hp, but most threads don't say anythin about changing fuel pump.. is this needed at all, or can I do without?? Planning on ct26 with 3sgte manifold, running around 7-10 psi. Will be dyno tuned also.
|
 |
Replies
|
Jul 18, 2015 - 10:15 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
my setup ran the RX7 440s and i used the stock fuel pump no problem. I was using an FIC and stock map sensor.
the information you read about using the 315's and the 3S-GTE map sensor worked on MR2's they had an older version of the 5S and older computers. that setup doesnt work well on the 6th gens -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
JohnnyGat0519 5sfte Fuel System Jul 17, 2015 - 9:31 AM
mkernz22 You'll need the walboro 255lph fuel pump.
As ... Jul 18, 2015 - 9:56 PM
JohnnyGat0519 QUOTE (mkernz22 @ Jul 18, 2015 - 9:5... Jul 19, 2015 - 3:07 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 11th, 2026 - 2:28 PM |