![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) ![]() |
How to wire up a wideband o2 sensor to the 5sfe engine? I have a ame augo o2 gauge.
-------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
Is the O2 sensor bare wires also? If so then the sensor is trash, wide bands have a calibrating resistor on the connector that's a specific value to each sensor. Sensor connector should be 6 wires, 2 heater and 4 for the sensor.
http://www.aemelectronics.com/products/sen...2-connector-kit What you need is probably that kit to give you the gauge side of the connector pair, AEM should be able to send you a pin out of what wire does what, you can buy extension harnesses from them also I think. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 11:01 AM |