![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined May 2, '15 From NY Currently Offline Reputation: 3 (100%) ![]() |
Up for grabs is a UR lightweight pulley.
I believe this to be an MR2 5SFE pulley with both belts being 4 groove. 4" in overall diameter, 14.6oz or 414g. It will fit either a 3S or a 5S crank, as they're the same on the front end. I had it on my 5SFE Camry for a few years working fine. It is an underdrive pulley in a 5SFE Camry, and requires a different belt (418K4 - I'll throw in the belt if you're purchasing this for a Camry/Calica). Celica/Rav4/Camry 5SFE pulleys from mid-90s are all same. It's a bit banged up (see detailed pics), but perfectly functional. Please do your research and understand what's for sale here before purchasing. $80 shipped OBO. ![]() ![]() ![]() ![]() ![]() ![]() This post has been edited by slavie: Jun 22, 2015 - 5:29 PM |
![]() |
![]() |
|
Enthusiast ![]() Joined Oct 31, '14 From NJ Currently Offline Reputation: 0 (0%) ![]() |
I don't mean to crap on your thread, but those pulleys are terrible for your motor. the OEM one is balanced with your crank and this one is not so it can cause unwanted vibrations through your crank and wipe out bearings. the only safe aftermarket crank pulleys to use are ones with built in dampeners to absorb vibrations. don't get me wrong some people can run these for years and never have an issue, but I have seen these wipe bearings in too many motors so for me its not worth the risk.
|
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 2:01 AM |