Jan 5, 2016 - 1:58 PM
|
|
|
Enthusiast ![]() Joined Mar 29, '11 From Bloomington, IN Currently Offline Reputation: 0 (0%) |
As the topic suggests, I'm looking to pick up some gently used stock exhaust components for my 95 ST. It's getting pretty noisy, but I don't know how much longer I'll keep it stock, so I'm just looking for some cheap replacement parts to hold the exhaust together for a year.
I'm looking specifically for the front flex pipe and cat, but I'll also be open to other components as well if you'd rather sell them as a set. I'm located in northern Indiana, but can pick up anywhere in Chicagoland, SW Michigan, central Indiana. I'll also consider paying for shipping. Thanks! Edit: It seems not all 6gc's have the same exhaust setup, so if possible I'm only looking for parts from 94 or 95 STs. This post has been edited by senick: Jan 6, 2016 - 2:56 PM |
![]() |
Jan 7, 2016 - 7:28 PM
|
|
|
Enthusiast ![]() Joined Mar 29, '11 From Bloomington, IN Currently Offline Reputation: 0 (0%) |
That's fantastic information. So when you say no resonator or cat, you mean as part of the manifold? That is, the 95 models have an extra cat attached to the manifold before the downpipe?
Therefore, if I use an OBDII manifold and downpipe from a 96+, it will fit perfectly with the rest of the stock exhaust? |
senick WTB: Stock Exhaust Parts 94-95 7a-fe Jan 5, 2016 - 1:58 PM
msk59 Give me a few days as I just took off mine OEM fro... Jan 6, 2016 - 9:19 AM
senick What type of downstream O2 sensor is on the exhaus... Jan 6, 2016 - 9:28 AM
msk59 On the 1996 STs, the O2 sensor is screw in type. T... Jan 6, 2016 - 1:35 PM
senick If it's the screw-in type, then I know the fit... Jan 6, 2016 - 2:53 PM
msk59 I think it fits. The header I am installing in my ... Jan 7, 2016 - 7:11 AM
igpx12 http://www.showmetheparts.com/apexhaust/
Look at ... Jan 7, 2016 - 3:58 PM
igpx12 For the manifold on a 94/95 that's what I mean... Jan 7, 2016 - 8:19 PM
msk59 I sent you pictures of my setup. My car has no cat... Jan 7, 2016 - 11:52 PM
senick Are you sure the O2 sensor will fit both setups? ... Jan 8, 2016 - 8:51 AM
igpx12 Yeah, just use an O2 socket and remove it from the... Jan 8, 2016 - 9:50 AM
senick Now I get it...I was under the assumption that the... Jan 8, 2016 - 10:12 AM
igpx12 If you don't have an O2 removal socket, you... Jan 8, 2016 - 11:52 AM
senick Great advice, thank you. I have a pass-through so... Jan 8, 2016 - 1:38 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 28th, 2026 - 9:46 AM |