WTB: Stock Exhaust Parts 94-95 7a-fe, Looking for front flex pipe, catalytic converter Options

[senick]

As the topic suggests, I'm looking to pick up some gently used stock exhaust components for my 95 ST. It's getting pretty noisy, but I don't know how much longer I'll keep it stock, so I'm just looking for some cheap replacement parts to hold the exhaust together for a year.

I'm looking specifically for the front flex pipe and cat, but I'll also be open to other components as well if you'd rather sell them as a set.

I'm located in northern Indiana, but can pick up anywhere in Chicagoland, SW Michigan, central Indiana. I'll also consider paying for shipping.

Thanks!

Edit: It seems not all 6gc's have the same exhaust setup, so if possible I'm only looking for parts from 94 or 95 STs.

This post has been edited by senick: Jan 6, 2016 - 2:56 PM

[igpx12]

If you don't have an O2 removal socket, you'll want to use a standard wrench, but be prepared to crank on it cause of the heat warping. For my downstream I used two wrenches to create leverage using the open end on the O2 and the other wrenches open end on the closed end of the one on the O2. However you get it, O2 socket is the easiest if you have one, deep socket wont get around the sensor wires.