strut going thru mount Options

[Jmk91]

So I installed all new KYB g2 struts with KYB mounts and brand new bump stops and sway bar end links and TRD springs. Everything is 100% new and correct parts. What's happening is the rear strut is moving like pushing threw the mount over any bumps causing a clunk sound. The nut in the rear that's in the middle of strut mount has play over any and all bumps. Like my strut isn't done correctly. The strut assembly is moving. I've replaced everything I can think of I also installed everything correctly... Ive had out the rear struts 3 times. Everything is done right I even have everything torqued to spec. So I'm lost... I didn't get an alignment yet but I honestly font want to drive my car way it is to a shop. I don't want to damage anything. Any ideas before I take it to a shop and pay out 3 arms and 2 legs. Any suggestions or ideas or if anyone else has went thru this help is greatly appreciated. Its also only in the rear. Front are fine I did all 4 at once.

[Jmk91]

The spacer goes on the top of the upper strut mount sir. You can actually take off the bolt with your car on the ground if you used lowering springs and add the spacer and torque nut and your done. I never tried it still on car with normal springs just lowering springs. I had trd springs.

You can actually just go down to any part store and find a spacer. I found my oem ones I threw away. Lucky me. I think they where 3/4th of an inch in height. All you need is to get the right diameter spacer. Or call dealership and get order one. If you need any help just shoot me a text 740-538-4169

This post has been edited by Jmk91: Jan 14, 2016 - 1:57 PM