Swapping in a 4th 3sgte soon, Need advice on what's needed to be done before dropping in Options

[ILoveMySilly97]

I'm planning on swapping in a 4th gen 3sgte and want to know what's recommended to be swapped or replaced or repaired while the engine is still out? Is the waterpump interchangeable with the 5sfe? Should I replace the oil pump seal and pulley seal? I know they're a common leak on a 5sfe. Here's the list I've made talking to a friend of mine with a st184 4th gen swap.

Interchangeable with 2nd gen

Front main seal #90311A0005
Rear main seal #9008031073
Alternator belt #909160229377
Power steering #99363-70760-83
Cam seals #9031135040

Injector Seals – 2zzge - 9030107024

Timing Belt – 3rd gen - 13568-79105

Wire - Wiregap
Clutch Kit – SouthBend
Oil – 10w30
Spark Plug – NGK Iridium BKR7EIX

[Smaay]

i remember reading that somewhere too, but it was never confirmed. since you are going to a 4th gen, that would rule out the 5S pump anyways.

just get the one i posted the link to. its the newer style with the metal vaines. i have that pump in my 3rd gen swap, my all-trac and another 3rd gen engine i just built

[ILoveMySilly97]

i remember reading that somewhere too, but it was never confirmed. since you are going to a 4th gen, that would rule out the 5S pump anyways.

just get the one i posted the link to. its the newer style with the metal vaines. i have that pump in my 3rd gen swap, my all-trac and another 3rd gen engine i just built

Aight. My guess would be since it's in the 95 mr2 turbo parts catalog. Then the 95 mr2 turbo water pump gasket would fit also then.