 1mzfe spark plug tube removal, v6 solara 1999 |
 Feb 10, 2016 - 9:45 PM
|
 
|
 Enthusiast  Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
How in hell do I remove the spark plug tubes on my 1mzfe motor. they don't have threads on top like the 5s. I have tried heating them up and pulling them up and out with vise grips but they wont budge. any help would be appreciated.
-------------------- |
 |
Replies
|
Feb 16, 2016 - 11:50 AM
|
|
|
Enthusiast Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) |
Like I said. I gave up. So I'm not removing them. But the reason was to put the head through the machine in the picture above. It maxes out at 5.5". The heads are in spec so I decided to just orbital the top with 240 grit sand paper and check the specs again.
-------------------- |
Posts in this topic
doory100 1mzfe spark plug tube removal Feb 10, 2016 - 9:45 PM
Smaay WOAH!!!! why the hell do you want ... Feb 10, 2016 - 9:47 PM
doory100 QUOTE (Smaay @ Feb 10, 2016 - 9:47 P... Feb 10, 2016 - 10:20 PM Bitter I think they're pressed into the head during a... Feb 10, 2016 - 11:37 PM doory100 I have a assembly drawing that shows them being in... Feb 11, 2016 - 6:11 AM Bitter I didn't see them on the Toyota parts diagram,... Feb 11, 2016 - 8:54 AM Smaay they dont protrude to the bottom surface, havent y... Feb 11, 2016 - 9:02 AM Smaay bottom of 1MZ head Feb 11, 2016 - 9:07 AM doory100 Calm down. I'm not sure how the machine proces... Feb 11, 2016 - 9:44 AM doory100 QUOTE (Bitter @ Feb 11, 2016 - 12:37... Feb 11, 2016 - 11:56 AM doory100 RE: 1mzfe spark plug tube removal Feb 11, 2016 - 4:48 PM Bitter Cool, learned something new. Feb 11, 2016 - 9:51 PM doory100 Well I have given up. No luck and I don't want... Feb 11, 2016 - 11:30 PM Bitter Use an inside pipe wrench to try to spin it after ... Feb 12, 2016 - 7:55 AM Smaay again i dont know why you want to pull these. wha... Feb 15, 2016 - 12:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2026 - 7:54 AM |