 Dentures, How to remove |
 Mar 20, 2004 - 8:38 PM
|
 
|
 Enthusiast  Joined Feb 16, '04 From San Diego Currently Offline Reputation: 0 (0%)  |
So I decided to go to a party. When I got back there were foot prints up and down my car and a dent in the roof. This was two days before I was getting my alarm installed.
Yarg. So I pulled out the ceiling trim and now I got just bare metal... I know the standard practice is to "hammer it out." But I don't want to start hammering without some advisement. Will it pop right back out? Should I just take it to a repair place? --------------------  |
 |
Replies
|
Mar 22, 2004 - 9:32 AM
|
|
|
Enthusiast Joined Feb 23, '03 From Florida Currently Offline Reputation: 0 (0%) |
If the dents arent creased, than get a rubber mallet, and a hard plastic hand sander base (the black palm grip for sandpaper) put the palm sander part on the paint side of the dent, and lightly try to tap out the dent from the inside with the rubber mallet.
|
Posts in this topic
mr_dude Dentures Mar 20, 2004 - 8:38 PM
Uppitycracker QUOTE (mr_dude @ Mar 20, 2004 - 6:38 PM) So I deci... Mar 20, 2004 - 9:04 PM celicarocker i thought this was gonna be about teeth... i was l... Mar 20, 2004 - 9:08 PM Uppitycracker QUOTE (celicarocker @ Mar 20, 2004 - 7:08 PM) i th... Mar 20, 2004 - 9:37 PM mr_dude Haha, you clicked because you thought it was about... Mar 20, 2004 - 10:01 PM celicarocker i wondered the same thing before... Mar 21, 2004 - 12:42 AM mr_dude Before..?
My mechanical engineer friend said the s... Mar 21, 2004 - 7:01 AM celicarocker thats exactly why i didnt buy them... if its on TV... Mar 21, 2004 - 11:39 PM blkGT tell me about it, my dad bought one of those vacuu... Mar 22, 2004 - 8:31 AM Raek the dent things do work...but, if there's even... Mar 22, 2004 - 9:49 AM mr_dude Cool Raek. Since I can borrow one from a friend, ... Mar 22, 2004 - 3:27 PM Phat_99CeliGT one word
"plunger" Mar 22, 2004 - 3:33 PM neoklis Just push it with your hands. if it goes into plac... Mar 23, 2004 - 3:16 AM DmVinny QUOTE (Phat_99CeliGT @ Mar 22, 2004 - 1:33 PM) one... Mar 23, 2004 - 3:48 AM
95STHATCH If the metal is not creased, you can use a heat gu... Mar 24, 2004 - 2:34 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 22nd, 2026 - 1:01 AM |