 Dentures, How to remove |
 Mar 20, 2004 - 8:38 PM
|
 
|
 Enthusiast  Joined Feb 16, '04 From San Diego Currently Offline Reputation: 0 (0%)  |
So I decided to go to a party. When I got back there were foot prints up and down my car and a dent in the roof. This was two days before I was getting my alarm installed.
Yarg. So I pulled out the ceiling trim and now I got just bare metal... I know the standard practice is to "hammer it out." But I don't want to start hammering without some advisement. Will it pop right back out? Should I just take it to a repair place? --------------------  |
 |
Replies
|
Mar 22, 2004 - 3:27 PM
|
|
|
Enthusiast Joined Feb 16, '04 From San Diego Currently Offline Reputation: 0 (0%) |
Cool Raek. Since I can borrow one from a friend, I'll try the easy, non-invasive approach first (sucking). Then if it doesn't work I'll bring out the big guns.
-------------------- |
Posts in this topic
mr_dude Dentures Mar 20, 2004 - 8:38 PM
Uppitycracker QUOTE (mr_dude @ Mar 20, 2004 - 6:38 PM) So I deci... Mar 20, 2004 - 9:04 PM celicarocker i thought this was gonna be about teeth... i was l... Mar 20, 2004 - 9:08 PM Uppitycracker QUOTE (celicarocker @ Mar 20, 2004 - 7:08 PM) i th... Mar 20, 2004 - 9:37 PM mr_dude Haha, you clicked because you thought it was about... Mar 20, 2004 - 10:01 PM celicarocker i wondered the same thing before... Mar 21, 2004 - 12:42 AM mr_dude Before..?
My mechanical engineer friend said the s... Mar 21, 2004 - 7:01 AM celicarocker thats exactly why i didnt buy them... if its on TV... Mar 21, 2004 - 11:39 PM blkGT tell me about it, my dad bought one of those vacuu... Mar 22, 2004 - 8:31 AM DmVinny If the dents arent creased, than get a rubber mall... Mar 22, 2004 - 9:32 AM Raek the dent things do work...but, if there's even... Mar 22, 2004 - 9:49 AM Phat_99CeliGT one word
"plunger" Mar 22, 2004 - 3:33 PM neoklis Just push it with your hands. if it goes into plac... Mar 23, 2004 - 3:16 AM DmVinny QUOTE (Phat_99CeliGT @ Mar 22, 2004 - 1:33 PM) one... Mar 23, 2004 - 3:48 AM
95STHATCH If the metal is not creased, you can use a heat gu... Mar 24, 2004 - 2:34 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 10th, 2025 - 9:26 AM |