6G Celicas Forums

Welcome Guest ( Log In | Register )

> Wheels, Help Me, I need some help about wheels and wheel offset
post Aug 28, 2016 - 4:43 AM
+Quote Post
DillonMulholland

Enthusiast

Joined Aug 21, '16
From Queensland Australia
Currently Offline

Reputation: 0 (0%)




Im wondering if These Rota Grids will fit. They are 17/8+44 but have been told it might hit the suspension because of the offset. Can anyone confirm??

Also what Rims have yous been running? What is nice on a celica looking at 16/17 inches.

Cheers
 
Start new topic
Replies
post Aug 28, 2016 - 4:57 PM
+Quote Post
trdproven



Enthusiast
*****
Joined Aug 2, '05
From Guam
Currently Offline

Reputation: 15 (100%)




dont mess with anything in the high 30s and up.

and if you plan to run flush I suggest dont look at the charts that are listed here. none of them were accurate because they don't account for ride height, camber, tire size, etc. Just measure your own set up and go from there. measure for outside movement and measure for inside clearance. and then use an offset calculator if you're not verse on measuring off the top of your head.

you'll need to select the right tire size as well when doing this, camber, and height, so there are a lot of variables. fender rolling may come into play if necessary.

This post has been edited by trdproven: Aug 28, 2016 - 5:01 PM


--------------------
94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi|
|Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto|
|Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8
04 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|

89 Supra (Sold)
90 Supra (Sold)

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 19th, 2025 - 2:42 AM