keyring light assembly, same with jdm? Options

[cellocinema]

i plan to install keyring light assembly. i know usdm one is just plug&play. my question is, if i get jdm one(ordering from japan) which has the same part number(81870-20040), would i get the same product? i'm a bit concerned that connector and such might be slightly different.



This post has been edited by cellocinema: Sep 9, 2016 - 8:05 PM

[The_enD]

Even if it is not it is just two wires, you can simply cut and use some generic plugs. My car didn't even have the ring in the first place, but the power is still there at a plug on the back side of the fuses.

This post has been edited by The_enD: Sep 9, 2016 - 7:33 AM

[cellocinema]

thanks a lot for good info.

Even if it is not it is just two wires, you can simply cut and use some generic plugs. My car didn't even have the ring in the first place, but the power is still there at a plug on the back side of the fuses.