 keyring light assembly, same with jdm? |
 Sep 9, 2016 - 4:17 AM
|
 
|
 Enthusiast  Joined Jun 10, '09 From South Korea Currently Offline Reputation: 5 (100%)  |
i plan to install keyring light assembly. i know usdm one is just plug&play. my question is, if i get jdm one(ordering from japan) which has the same part number(81870-20040), would i get the same product? i'm a bit concerned that connector and such might be slightly different.
This post has been edited by cellocinema: Sep 9, 2016 - 8:05 PM |
 |
Replies
|
Sep 9, 2016 - 7:33 AM
|
|
 Enthusiast Joined Apr 12, '13 Currently Offline Reputation: 53 (100%) |
Even if it is not it is just two wires, you can simply cut and use some generic plugs. My car didn't even have the ring in the first place, but the power is still there at a plug on the back side of the fuses.
This post has been edited by The_enD: Sep 9, 2016 - 7:33 AM |
|
Sep 30, 2016 - 8:53 AM
|
|
|
Enthusiast Joined Jun 10, '09 From South Korea Currently Offline Reputation: 5 (100%) |
i bought a used one from one of our members here and it came with a harness and metal ground wire as shown in the pic below. the bulb housing is connected to a black box and semi translucent cylindrical part that are attached to the harness. i have read about 'joining two wires' to install the keyring light, but mine is not just two wires. i also heard that the keyring assembly can be plug&play for usdm. i'm wondering where the female connector is located for the harness. maybe in the door panel?
 QUOTE (The_enD @ Sep 9, 2016 - 7:33 AM)  Even if it is not it is just two wires, you can simply cut and use some generic plugs. My car didn't even have the ring in the first place, but the power is still there at a plug on the back side of the fuses.
This post has been edited by cellocinema: Sep 30, 2016 - 8:55 AM |
Posts in this topic
cellocinema keyring light assembly Sep 9, 2016 - 4:17 AM
cellocinema thanks a lot for good info.
QUOTE (The_enD ... Sep 9, 2016 - 8:07 PM cheela USDMs look like this and the plug/harness should j... Sep 30, 2016 - 11:28 AM
cellocinema thanks for your response. my harness has a differe... Oct 1, 2016 - 10:53 AM cellocinema i just cut the wires, getting rid of black box, fu... Oct 3, 2016 - 6:01 AM cheela that's good. well glad you figured out a way a... Oct 3, 2016 - 9:10 AM cellocinema i changed the bulb to leds. just one bulb was not ... Oct 7, 2016 - 3:11 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 16th, 2026 - 4:09 AM |