 Poly bushing woes (front LCA)? |
 Oct 14, 2016 - 12:02 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
For those of you who have successfully installed poly suspension bushings, did you run into this issue?
 Basically, since this bushing is a two-piece and a steel collar, I think there's an air bubble that won't give when I press in the steel collar. I've tried 3-jaw pullers, c-clamps, a vise, and a press. I can't get this bushing further in than the image shows. Any tips? -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
Replies
|
Oct 15, 2016 - 11:02 AM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
I never had that issue with my Celica, you can cut a tiny tiny little V into one of the bushings to let the air out I suppose or drill a hole on the arm and install a grease fitting so you can add silicone grease via gun later on which actually is a pretty darn good idea!
-------------------- |
Posts in this topic
HectortheRican Poly bushing woes (front LCA)? Oct 14, 2016 - 12:02 PM
jordisonjr Strange, mine fit tight. However I didn't pres... Oct 14, 2016 - 12:54 PM HectortheRican I was able to stuff it in by getting it close enou... Oct 14, 2016 - 1:29 PM
HectortheRican QUOTE (Bitter @ Oct 15, 2016 - 10:02... Oct 15, 2016 - 1:28 PM Bitter Ah yep, my 00 up here in salt country needed many ... Oct 15, 2016 - 2:01 PM ILoveMySilly97 I ran into the same problem. Sent it to a machinin... Oct 15, 2016 - 2:38 PM HectortheRican I do have one worry about the poly bushings for th... Oct 15, 2016 - 7:41 PM Bitter That's not a bad idea, maybe you can size a bi... Oct 15, 2016 - 8:41 PM HectortheRican QUOTE (Bitter @ Oct 15, 2016 - 7:41 ... Oct 16, 2016 - 12:45 AM richee3 Mine did the same thing. I struggled for a while, ... Oct 15, 2016 - 9:44 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 29th, 2025 - 4:38 AM |