![]() |
![]() |
![]() |
|
Enthusiast Joined Oct 21, '16 Currently Offline Reputation: 0 (0%) ![]() |
Hello all, I found a surprise in my 1996 Celica: It has an ECU for a 7afe manual transmission engine, however, mine is a 5sfe manual. The engine runs well, but gas mileage is not as good as it is supposed to despite replacing the cap, rotor, plugs, wires, and I get a P0141 code despite replacing the O2 sensor with an OEM Denso and checking the wiring connection between the sensor and the computer. The cables don't appear to be all spliced up, either.
Why would someone do this, and what would I have to do to replace it with the original (if this would fix the gas mileage and sensor issues)? This post has been edited by thebestofall007: Oct 21, 2016 - 5:00 PM |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
I was going to mention that the connectors may not be the same but I didn't feel like putting in the effort to confirm it.
You're sure it's a 5S under the hood right? Weird things happen.... -------------------- |
![]() |
|
Enthusiast Joined Oct 21, '16 Currently Offline Reputation: 0 (0%) ![]() |
I was going to mention that the connectors may not be the same but I didn't feel like putting in the effort to confirm it. You're sure it's a 5S under the hood right? Weird things happen.... The previous owner had the original 5sfe throw a connecting rod when I first got the vehicle and I had to replace it with another 5sfe. I did not know about the mismatch with the numbers on the ECU at that time. |
![]() ![]() |
Lo-Fi Version | Time is now: July 13th, 2025 - 5:46 AM |