Interest in Braided Stainless Clutch line, Who would want one? Options

[96stgreendemon]

Trying to gauge interest in who all would want a braided master to slave cylinder clutch line, ive been shopping around and have noticed there are not too many options for this and decided to take matters into my own hands. I could make these at a reasonable price and have a decent turn around time on the product. The Line in question would be a stainless steel braided -4AN line with fittings to match the master and slave and would be a one piece system to replace the old worn out stock system.
As some of you know a couple of my friends have an internet parts buisness and have recently gotten a direct account with a company specializing in american made, good quality, inexpensive AN lines/Fittings and i would like to pass the savings onto you all. I know how hard it is to find good quality inexpensive replacement/Performance parts for these cars, and with this opportunity it could evolve from the Clutch lines to Braided brake lines if there is enough interest. Let me know your all's thoughts on this. I can make one of these just for myself but i would rather help you all out with this as well.

[BonzaiCelica]

The clutch line that came with my swap was 24" and connected directly to top of the transmission because my chassis was originally automatic. So buying this is pretty much bolt on for those going from auto to manual if you can't source an original hard line.


http://www.jegs.com/i/JEGS-Performance-Pro...635108/10002/-1

This post has been edited by BonzaiCelica: Nov 21, 2016 - 8:20 PM