 Power window lost home?, Reliably stops 1.5" from top |
 Jan 10, 2017 - 5:42 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
Can this happen, guys?
The driver side window otherwise works fine. It's not off its track. It rolls all the way down and almost all the way back up reliably - it just stops 1.5" from the top. Could the motor have lost its 'zero' somehow? Edit: At it's final level, 1.5" away from the top, it behaves exactly like it would if it were all the way up. Upon toggling the switch up, it makes no effort to move. Not sluggish or anything. This post has been edited by HectortheRican: Jan 10, 2017 - 10:43 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
Replies
|
Jan 11, 2017 - 10:19 AM
|
|
 Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
might have to pull it out and check the drive gear or drive rollers. I think they're plastic and may have become brittle and broken a tooth or so which would explain why they still work but just not that a certain point where the tooth/teeth are missing?
--------------------  *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
Posts in this topic
HectortheRican Power window lost home? Jan 10, 2017 - 5:42 PM
Box The motor cable could be in a kink. Jan 10, 2017 - 6:34 PM
HectortheRican QUOTE (Box @ Jan 10, 2017 - 4:34 PM)... Jan 10, 2017 - 9:38 PM Box I want to say this is what mine did before the cab... Jan 11, 2017 - 12:34 AM Wild202 I think you need to disassemble the door. There ha... Jan 11, 2017 - 10:43 AM HectortheRican QUOTE (Box @ Jan 10, 2017 - 10:34 PM... Jan 11, 2017 - 3:41 PM Box The glass unbolts from the regulator so you can pu... Jan 11, 2017 - 4:03 PM Zimluura Had a similar problem recently.
For me the driver ... Jan 14, 2017 - 11:17 PM Bitter Frost King FV516 makes a good replacement vapor ba... Jan 15, 2017 - 8:44 PM HectortheRican QUOTE (Box @ Jan 11, 2017 - 2:03 PM)... Jan 16, 2017 - 12:44 PM Zimluura Hypothetically, if the motor is running reliably.
... Jan 16, 2017 - 10:37 PM HectortheRican QUOTE (Zimluura @ Jan 16, 2017 - 8:3... Jan 17, 2017 - 6:07 PM Zimluura QUOTE (HectortheRican @ Jan 17, 2017 - 6... Jan 17, 2017 - 6:33 PM HectortheRican Well I ordered a used (but tested) regulator/motor... Jan 18, 2017 - 2:42 AM Box Yeah when mine went out a few years ago it was lik... Jan 18, 2017 - 9:33 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 22nd, 2025 - 5:13 PM |