 Power window lost home?, Reliably stops 1.5" from top |
 Jan 10, 2017 - 5:42 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
Can this happen, guys?
The driver side window otherwise works fine. It's not off its track. It rolls all the way down and almost all the way back up reliably - it just stops 1.5" from the top. Could the motor have lost its 'zero' somehow? Edit: At it's final level, 1.5" away from the top, it behaves exactly like it would if it were all the way up. Upon toggling the switch up, it makes no effort to move. Not sluggish or anything. This post has been edited by HectortheRican: Jan 10, 2017 - 10:43 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
Replies
|
Jan 11, 2017 - 4:03 PM
|
|
 Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
The glass unbolts from the regulator so you can pull it out and place it in the backseat or somewhere else safe, then pulling the regulator and motor is a contortion act like it is with every car but I seem to recall the Celica wasn't so bad.
-------------------- 2001 Miata LS 5-speed
|
Posts in this topic
HectortheRican Power window lost home? Jan 10, 2017 - 5:42 PM
Box The motor cable could be in a kink. Jan 10, 2017 - 6:34 PM
HectortheRican QUOTE (Box @ Jan 10, 2017 - 4:34 PM)... Jan 10, 2017 - 9:38 PM Box I want to say this is what mine did before the cab... Jan 11, 2017 - 12:34 AM cheela might have to pull it out and check the drive gear... Jan 11, 2017 - 10:19 AM Wild202 I think you need to disassemble the door. There ha... Jan 11, 2017 - 10:43 AM HectortheRican QUOTE (Box @ Jan 10, 2017 - 10:34 PM... Jan 11, 2017 - 3:41 PM Zimluura Had a similar problem recently.
For me the driver ... Jan 14, 2017 - 11:17 PM Bitter Frost King FV516 makes a good replacement vapor ba... Jan 15, 2017 - 8:44 PM HectortheRican QUOTE (Box @ Jan 11, 2017 - 2:03 PM)... Jan 16, 2017 - 12:44 PM Zimluura Hypothetically, if the motor is running reliably.
... Jan 16, 2017 - 10:37 PM HectortheRican QUOTE (Zimluura @ Jan 16, 2017 - 8:3... Jan 17, 2017 - 6:07 PM Zimluura QUOTE (HectortheRican @ Jan 17, 2017 - 6... Jan 17, 2017 - 6:33 PM HectortheRican Well I ordered a used (but tested) regulator/motor... Jan 18, 2017 - 2:42 AM Box Yeah when mine went out a few years ago it was lik... Jan 18, 2017 - 9:33 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 27th, 2025 - 4:08 PM |