Rear suspension rattle Options

[Blk94GT2200]

I was wondering, before I get underneath my Celica has anyone encountered sounds that are similar to bad bushings out back? What did it end up being?
Are there better parts to instal? I plan on doing suspension mods to tighten up the feel as well as compliment handling.
Shocks and struts
New springs mild drop preferred
Polyeurathane bushing replacements
Motor mounts
Strut tower brace
Larger Calipers and rotors slotted
Any info on known upgrades will be a great help

I am reading through the stickies .

This post has been edited by Blk94GT2200: Mar 17, 2017 - 2:39 PM

[jordisonjr]

You have to describe the problem a little better, in order for people to be able to actually answer.
Upgrading sway bars and endlinks will significantly improve the handling. I would likely do those before strut tower braces, or larger brakes. Also, Polyurethane bushings can be quite the pain to do, as the trailing arms in the rear are known to be difficult to remove.

I'd probably do struts and a lowering spring, and then sway bars and end links first.