![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Apr 22, '17 From philly Currently Offline Reputation: 0 (0%) ![]() |
I'm looking for a new wheel and im not really sure how/where to go about it. New to imports, as this is my first one.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
If you don't want to roll fenders, that limits you a lot in size. You're giving up about an inch or so of track width in the rear without rolling. Front isn't as important since it essentially factory rolled.
Without stretching tires and without rolling, you'd probably be limited to a 7-7.5" max wheel width. For an illustration, I have 17x8 +35 wheels and 235/45 tires. I had to roll the rear fenders and push back the tabs in the front fender. I used to have 215/40 tires on the same wheel with no clearance issues, but they were a bit stretched. 215/40 is more for a 7-7.5" wide wheel. I plan on getting 17x8 +25 wheels with 10mm spacers in the rear soon (same tires). I will have to completely roll the fender and make sure the rear and front fender lips are folded back. This post has been edited by HectortheRican: May 17, 2017 - 4:45 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
Enthusiast ![]() Joined Apr 22, '17 From philly Currently Offline Reputation: 0 (0%) ![]() |
If you don't want to roll fenders, that limits you a lot in size. You're giving up about an inch or so of track width in the rear without rolling. Front isn't as important since it essentially factory rolled. Without stretching tires and without rolling, you'd probably be limited to a 7-7.5" max wheel width. For an illustration, I have 17x8 +35 wheels and 235/45 tires. I had to roll the rear fenders and push back the tabs in the front fender. I used to have 215/40 tires on the same wheel with no clearance issues, but they were a bit stretched. 215/40 is more for a 7-7.5" wide wheel. I plan on getting 17x8 +25 wheels with 10mm spacers in the rear soon (same tires). I will have to completely roll the fender and make sure the rear and front fender lips are folded back. Will 18x7.5s with a 45 offset and 225/40/18 tires fit? I cant find any specifics, just ideas, and unfortunately I'm not smart enough to extrapolate **** apparently. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
Will 18x7.5s with a 45 offset and 225/40/18 tires fit? I cant find any specifics, just ideas, and unfortunately I'm not smart enough to extrapolate **** apparently. I had 7.5” wide wheels once and they fit just fine. Same size tires, too. So yeah, that size should fit. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
Enthusiast ![]() Joined Apr 22, '17 From philly Currently Offline Reputation: 0 (0%) ![]() |
Will 18x7.5s with a 45 offset and 225/40/18 tires fit? I cant find any specifics, just ideas, and unfortunately I'm not smart enough to extrapolate **** apparently. I had 7.5” wide wheels once and they fit just fine. Same size tires, too. So yeah, that size should fit. Just went and bought them, got them home and just propped them up next to my stocks and HOLY **** they do NOT look liek they will fit..... |
![]() ![]() |
Lo-Fi Version | Time is now: June 22nd, 2025 - 7:00 AM |