3sgte 4th gen swap, Hello I am trying to swap my Toyota Celica 97 gt to a 3sgte 4th gen Options

[Tmiller]

I have the 3sgte 4th gen engine on the way and getting things ready to go! Looking for help and ways to get it going ! Right now I have done alot of research and talked to tons of people. I was wondering if I could get some help with my project . Right now I'm planning on running the engine stock I made sure it came with the 3sgte hanress and ecu and im getting a flywheel and clutch kit . Iv been looking around and doing research and I might attempt my wiring harness myself I have two harnesses and I might just try it . But I also need help from people that have experience with the swap and the 6gen community. Helping me find parts, and help me get it on the road with a wonder build ! I hope this goes well , would appreciate all the help I can get !

[HardHead93]

As far as gauges, I would recommend oil pressure, water temp, boost, and AFR. If you look around some of these readings can be combined into 1 gauge to save space. LoTek makes a good pillar gauge pod. Also, I am not sure how much boost you plan to run but if you do not get a boost controller the engine will only run 7-8 psi (wastegate pressure). If you want to turn up the boost don't go past 14 psi on 91 octane and 17 psi on 93 octane.

This post has been edited by HardHead93: Sep 22, 2017 - 11:57 AM