how to instal TRD rear wing, I NEED thoto Options

[Lexa666]

Recently put TRD spoiler
disadvantages:
1-mount.
studs instead of bolts.
2 M8 threaded studs and the holes in the lid 5-6.
3-one opening coincided, the second not. I had to make one more hole.
4 on the back of the lid have to cut a piece of metal to tighten two screws.
5-side panel to fit snugly inside. If the gap.

I need a picture, who is established
1 -
2 -
3 -
4 photos as done
5 is firmly prilegaet.Foto

Done in a hurry, because cover should be changed.
When looking to buy a new one. I want to do this carefully, because changing that restayl (a lot of extra holes), but not heated.

[cheela]

If you have the 2 post, it should fit, no holes needed.
I think in this post, the problem was they had the euro 2 post spoiler which is shorter in length than the JDM/OEM 2 post so only one hole matched. the 3 post would be the same issue, only one hole matched and have to drill the second. I believe you have a regular 2 post and not the euro 2 post so you should be fine.