![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 15, '10 From Russia Currently Offline Reputation: 0 (0%) ![]() |
Recently put TRD spoiler
disadvantages: 1-mount. studs instead of bolts. 2 M8 threaded studs and the holes in the lid 5-6. 3-one opening coincided, the second not. I had to make one more hole. 4 on the back of the lid have to cut a piece of metal to tighten two screws. 5-side panel to fit snugly inside. If the gap. I need a picture, who is established 1 - 2 - 3 - 4 photos as done 5 is firmly prilegaet.Foto Done in a hurry, because cover should be changed. When looking to buy a new one. I want to do this carefully, because changing that restayl (a lot of extra holes), but not heated. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) ![]() |
no, it's the same process as converting from 3-post to 2-post. 2 out of 4 holes will match up. and then you just have to drill 2 more and cover up the other ones. It's not all that hard. there's a few posts about it on here.
-------------------- ![]() *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
![]() ![]() |
Lo-Fi Version | Time is now: July 17th, 2025 - 6:11 PM |