![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 6, '17 From Sacramento Currently Offline Reputation: 0 (0%) ![]() |
Is there any electrics involved with the egr? I'm truly at a loss and have one week before my temp registration expires and I'll be liable for a ticket. My friend and were looking at the evap canister, we put the car up on jacks, took apart the rear of the car, and found a broken plastic piece attached to some vacuum lines, we modified the piece and hooked it back, light came back on. Egr, modulator, and vsv are new, not getting evap canister code. I don't know what to do! ! I'm starting to think its electrical or the computer is glitching or some ****. Need help! Anyone in Sacramento, CA?
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) ![]() |
i was getting both codes, insufficient and excessive flow. i replaced the VSV under the manifold.
are you sure your vacuum lines are correct? there is an EGR temp sensor, maybe that has gone bad? -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 1:50 AM |