where to run the wires, from the main to the engine Options

[acenova]

where do I run the wires from the main compartment to the engine and the battery? Like where's the hole at that I can squeeze the wire throught?

[Clipsetuner]

First I ripped out that old install. The Fuse and Most of the wire was destroyed. I picked up 35ft of 4g wire from sounddomain ( here in 2 days nice ). I was gonna run it threw the driver side then figured there wasnt a whole big enough inside ( where the wire come threw the side inside the cab, 8g Might fit tho). So I took off the inner and fender on the passenger side and laid out How I think it should go cut to the right length and started Zip Tieing.

I looped around the battrey with about 9" of wire then mounted a Phenoix gold Fuse. I went under the front crossmember attaching the wire to the exsisting Loom and also zip tieing threw the extra holes. went the rest of the way across the front cross member I twisted the cable a lil bit so looking from the front or straight down couldent see it ( I know im anal ) Into the fender cavatee it went. I continued to attach it to the exsistin loom with zip ties. To get it into the cab you have you have to cut a very very small hole in one of the 2 ruuber groments Strech it to get your wire threw, then I filled it with a slicone sealer then wrapped it up with electric tape.
Total time 4-6 hours.
DTE