6G Celicas Forums

Welcome Guest ( Log In | Register )

> Rear ABS rings ?
post May 9, 2018 - 2:18 PM
+Quote Post
glenn



Enthusiast
*
Joined May 21, '12
From Stockholm Sweden
Currently Offline

Reputation: 0 (0%)




My ST202 sadly been standing still a few years now, but now I plan to fix it.. one of the problems was that the ABS on right rear wheel didnt work too well, it kind of always pulsed when you braked, at least right before the stop.

This is usally the ABS ring that is the problem, but is it possible to change it without replacing the hub ? where can i buy one then ?

I searched and searched, but only find the rings for the front wheels..


--------------------
Black Toyota Celica GT-Four ST205 1996 (My love..)
Silver Toyota Celica GT ST202 1994 (Used to be my daily driver)
Black SAAB 9-5 Aero sportcombi 2005 (My daily driver..)
Black Suzuki GSX1100e 1983 (My steam locomotive)
 
Start new topic
Replies
post May 10, 2018 - 3:47 PM
+Quote Post
slavie

Enthusiast
**
Joined May 2, '15
From NY
Currently Offline

Reputation: 3 (100%)




Here are some pictures of the rear hub & bearing assembly with the ABS ring. Like I said, the ABS ring is hammered onto the inside of the spindle, and the whole thing is airtight with the bearing assembly. When you unbolt the 4 bolts, you'll see there is a seal b/w the hub and the backing plate. That's why I said I cannot imagine how this part could go bad without a catastrophic failure.

https://www.rockauto.com/en/moreinfo.php?pk...363&jsn=395


Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 18th, 2025 - 10:05 AM