Midwest Summer Meet **DECISION TIME**, We're all going to get another taste of Cheela's butt Options

[bloodMoney]

Alright folks.

There has been some chatter in the spring meet thread, so I figured we can start a new thread for this.

Date availabilty:

8/18
8/25

So far, it's looking like the 18th is winning out. I need to check with Stacy about our availability.

Where:

https://goo.gl/maps/2D9dtdbKk452

Roll Call:

1. Cheela and Mai See
2. Zeen
3. Jordan
4. Sammy and Jake
5.
6.
7.
8
9.
10.


Let's finalize the date and we'll take it from there.
I'll try not to set the date and miss the meet anyway again....

Per Zeen's request, we'll try to bring Stacy's 165 out again.

This post has been edited by bloodMoney: Jun 20, 2018 - 3:34 PM

[Bitter]

I do not, I think I have a spare 2ZZ part somewhere but it's not the same as 1ZZ. What's failed on yours? I was able to replace JUST the pulley which was a little noisy, the cylinder on mine as OK but they're common to leak and cause belt bouncing and screaming.

[narly_charley]

I do not, I think I have a spare 2ZZ part somewhere but it's not the same as 1ZZ. What's failed on yours? I was able to replace JUST the pulley which was a little noisy, the cylinder on mine as OK but they're common to leak and cause belt bouncing and screaming.

I was certain it was the front or rear motor mount causing lots of noise while in gear, but now I'm thinking it's the tensioner. I think ther cylinder has failed, but I'll confirm tomorrow. I'll take the belt off and start it up and find out if the noise is gone.