 7AFE to 3SGE (non beams/turbo) Conversion, Is there anything that needs to be done to the loom? |
 Aug 20, 2018 - 11:04 AM
|
 
|
|
Enthusiast Joined Dec 23, '15 From Ireland Currently Offline Reputation: 1 (100%)  |
So I have a 3SGE with box, loom, shafts, ecu. Basically to do a straight swap into the 7AFE celica but curious to know if there is anything with the wiring i need to adjust. Trying to find details on it and its very hard to find anything. Any help would be appreciated.
As far as I can tell, its just dump straight in. I am aware of the engine mount being different, that's ok. Just the electrics I am more concerned about. Thanks in advance 
|
 |
Replies
|
Sep 16, 2018 - 2:07 AM
|
|
|
Enthusiast Joined Dec 23, '15 From Ireland Currently Offline Reputation: 1 (100%) |
Thanks for that
the swap was a success! Car runs on its own power. I have a few minor problems which I can deal with fixing later but ATM the radiator fans kick in with accessories. Any thoughts as to why? The harness around the engine hasn't been touched so kinda confused why it would just kick in. I'll see about relay and make sure fuses are OK but no idea what it could be. |
Posts in this topic
Makarintosh 7AFE to 3SGE (non beams/turbo) Conversion Aug 20, 2018 - 11:04 AM
njccmd2002 there are a few guys here that have done the swap ... Aug 27, 2018 - 8:35 PM
njccmd2002 QUOTE (Makarintosh @ Sep 16, 2018 - 2... Sep 17, 2018 - 5:23 PM Makarintosh QUOTE (njccmd2002 @ Sep 17, 2018 - 6... Sep 29, 2018 - 2:05 PM bloodMoney IIRC, if there is no signal from the temp sensor t... Sep 17, 2018 - 8:07 AM Smaay if I remember correctly, the water temp sensor was... Sep 26, 2018 - 7:02 PM Makarintosh QUOTE (Smaay @ Sep 26, 2018 - 8:02 P... Sep 29, 2018 - 2:08 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 27th, 2025 - 9:36 AM |