![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Sep 9, '02 From Scranton, Pa Currently Offline Reputation: 7 (100%) ![]() |
did anyone buy a loaded calipar set for the rears? or did everone go to the junk yard? i am curious, because for my nissan, i can do an oem upgrade and if i get a loaded set it comes with everything i need except rotor... brackets and all... i know for the celica well be short the GT brake cables but for about 110 minus the cores ill have a HUGE difference on my nissan...just curious if anyone tried this route...
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Dec 16, '02 From Cincinnati, Ohio Currently Offline Reputation: 0 (0%) ![]() |
You don't need the spindles. You can use the same ones from teh ST. ALso, I used the same parking brake cable from the ST. You will have to cut off a small ridge on the ST parking brake where it bolts up to the backing plate. WOrks just fine after that. I used a dremel. After that, just tighten the nut that under the center console. You WILL need the backing plates so the calipers can attach. Also, you will have to get GT brake lines that run from the calipers to the main line. I have those if you want them.
CAR-Parts.com is the best bet for sourcing parts |
![]() ![]() |
Lo-Fi Version | Time is now: July 17th, 2025 - 7:15 PM |