AWD Conversion > 94 Celica GT, How much? Options

[mikemikula]

Hello, I was wondering about how much it costs for parts and labor to convert my car over to all wheel drive. Also if that means I will need the 3s-gte engine swap/transmission to handle it?

[_Jim_]

The AWD parts you can get from me, Trans, axles, driveshafts, rear diff, etc will run you 1800 shipped. A GEN3 3sgte will run you 2400 with free shipping to your door.

If bought together, you can save some money. Everything together will run you 3800 with free shipping to your door. Then you will need to find a competent mechanic who is wiling to take him time and read the wealth of information on this site about swapping to a 3sgte. Then you need to bring in a guy who does frame repair and show him where he needs to weld you up some subframes for the rear. Once the subframes are made and welded into the car,,,you can basically bolt the AWD stuff in. You will have some more fabrication work such as cutting out the spare tire well in the back, running a fuel cell, or ST165/185/205 gas tank, extending brake lines, and welding in some drive shaft support brackets,

It is possible, but you need someone with a good head on his shoulders, and someone you can trust, I hope this helps.

[demmahom34]

What if i wanted to make it rwd instead of awd. The motor is going to be a 2gr and other than the transmission what do you think I can transfer from the gt four to a st204

[njccmd2002]

What if i wanted to make it rwd instead of awd. The motor is going to be a 2gr and other than the transmission what do you think I can transfer from the gt four to a st204

A pain in the ass conversion you want to do.

You will need 2grfse i think, thats already rwd. Maube ford 8 inch differential. And a lot of welding supplies.