GT-Four Full Conversion Options

[jcagle]

After 7 years as a 3S-GTE swap, the FWD transmission on my GT crapped out about a year ago. Having started the project late in college, and now being a more seasoned MechE the AWD conversion seemed a little less daunting that it was many years ago. Probably 2 months from being road worthy, but only a little bit of fabrication remains for sway bar brackets and an exhaust.

Saving the more interesting chassis photos for when the work is complete, but here are some scoping shots. The goal is to have a nearly stock looking car with a few subtle perks, including

- TRD full adjustable suspension
- C-One strut tower and anti-roll bars (front and rear)
- Hybrid (ball bearing) CT20B turbo by Fensport, uprated to 1.2 bar (~320 bhp)
- Hand painted brake calipers
- So many new screws, nuts, and hoses that I've completely lost count. Specialized fasteners were replaced with Toyota OEM, while generic fasteners were replaced with class 10.9 steel (McMaster)











This post has been edited by jcagle: Jun 2, 2016 - 9:24 PM

[SleeperCelica3]

Hey could mabie give me some advice on what i need for my stock 5sfe transmission to work in my 3sgte swap?

[bloodMoney]

Hey could mabie give me some advice on what i need for my stock 5sfe transmission to work in my 3sgte swap?

It's been documented here... It might even be in the stickies....

You'll need a 3s flywheel and pressure plate, with a 5s clutch disk. IIRC, If you call southbend clutch, they know the combo and a bunch of users have had good experience with them.