Engine gaskets, Looking for assistance on identifying a couple gaskets from rebuild kt Options

[Livewire]

Alright back for more help, I’m working through the gasket kit on my rebuild and need a hand identifying a few of these gaskets, looked everywhere and couldn’t find anything on these and want to make sure I get everything in. If you can help identify anything I’ll edit the post so it’s there for others later but here we go.

Also is there a difference between 10 and 11? Both seem to go on the plenum even though 10 looks like a better fit



1. Oil pump gasket
2. Front coolant outlet near exhaust manifold
3. Oil pickup tube gasket
4. Rear main carrier plate seal
5. Engine rear under MAF
6. Coolant inlet near power steering pump
7. Throttle body
8. Water pump
9. Oil pan Drain plug gasket?
10. Plenum gasket
11. Alternate plenum gasket
12. Rear main seal
13. Front main
14. Main camshaft seal
15.
16. Distributor o ring
17.
18.
19. injector seals
20. Exhaust manifold lower gasket
21.
22. Valve stem seals
23. spark plug gaskets inside valve cover

This post has been edited by Livewire: Jul 21, 2020 - 2:42 PM