![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Nov 29, '10 From Lake Havasu City, AZ Currently Offline Reputation: 31 (100%) ![]() |
Alright, so my passenger side rear hub seems to be 'bent' or at least it's not centered correctly. And I was looking to replace them with my friends assistance but have an itch to address.
In the discussion of this thread HERE. It was said that the xv10 Camry's rear hub/bearing assembly can bolt onto the Celica's rear; which would mean the rotors would have to be re-drilled to 5x114 to mate with the new hub. Correct? On eBay: 94-99 Celica Rear Hub/Bearing Assembly- $230 91-96 Camry Rear Hub/Bearing Assembly- $66 I figured since the price difference is relatively large. Than I should go the conversion route ![]() Then I wondered if I can buy rotors for a xv10 Camry, would they fit the stock brake caliper? Upon searching I found this info (unconfirmed): --------------------------------- 94-99 Celica -------- 91-96 Camry ----- Outside Diameter:-------------- 269mm ----------------- 269mm --------- -------------Height:------------ 64.6mm ---------------- 64.9mm -------- ---------Nom Thick:------------ 8.9mm ----------------- 10mm ---------- ----------Min Thick:------------- 8mm --------------------- 9mm ----------- -------Bolt Pattern:------------ 5x100 ------------------- 5x114 ---------- So with such a small difference in Thickness, while still having the same overall Diameter, Would it be possible to utilize the Camry's rear rotor as well? Can anyone weigh in here?? I really need to fix my rear, because sounding like a wooden rollercoaster is getting old ![]() This post has been edited by smkr3w: Aug 24, 2012 - 6:40 PM -------------------- ![]() 6gcHeroes:808hectortimmybatmandiegotigamak |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
available wheels =
Forged: Anovia Kano (Gunmetal Grey) 17x8 +35 offset weigh 16.3 lbs $850 Flow Formed: -Konig Hypergram 17x8 +35 offset (5x114) weigh 16.8 lbs each for $1100 -Circuit Performance CSF 17x8 +35 offset (5x114) weigh 18.1 lbs $850 -Rota Titan F in 17x8 +35 offset weigh 17.4 lbs for about $1200-1300 with a 2-3 month wait time from Australia -Enkei RPF1 17x8 (also in 5x114) +35 offset weigh 16.1 lbs @ $1300 with center caps (only in Silver finish) -Wedsport TC105X 17x8 +32 offset weigh 15.4 lbs $2350 This post has been edited by BonzaiCelica: May 29, 2025 - 4:23 PM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() ![]() |
Lo-Fi Version | Time is now: July 9th, 2025 - 11:15 AM |