Feb 10, 2003 - 2:56 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
I'm planning on putting a turbo into my 94 GT - and im thinking CT-26 outta a supra and maybe if i can fit the intercooler, that too. Plus high compression pistons, new (possibly kevlar) clutch, but I think im missing something...keep in mind im not set on this CT-26, but the kit from Buillen or whatever boosts about 45hp pushin 5psi, not too much considering its 2500 dollars. Ne body ?
|
![]() |
Feb 10, 2003 - 6:10 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Oct 27, '02 From Barbados Currently Offline Reputation: 0 (0%) |
Please check out my post at http://www.6gc.net/forums/index.php?act=ST&f=4&t=662 TurboCharger project from scrap for Do-IT-Yourself
Please read the whole post. Also, please do some reading on tunign and so on. 1) Your compression pistons would be adequate for turbo. High compress. pistons are good for NA. Even then, your head is not geared towards performance, so you might have some detonation going to 11:1 and above. You normally use low compress pistions 8.0+:1 and up on turbocharge engines. The CT26 is good. remember that the supra is twin turbo's, implying small turbos to start with. That is why you have the same turbo in the GTFours. Twin turbos almost mean HP= Nx(turbos power @ 80% efficiency) where N is the number of turbos. eg. I am not sure on the power out put on this turbo. But here goes. The CT26 is capable of 300HP at and unreliable state. So let say 80% of its efficiency is 280HP. That means that in twin turbo applications, like in the supra or any car that uses a similar turbo and where are the condition are met, the total engine output limited by the turbos in this case (supra) maybe 480 -520HP on these stock turbo. Again, I am estimating here, knowing nothing on supra power capabilities on these turbos. You will need some piggy back components like Apexi SAFC and so on. Again, read my post for such details. You can do alot more HP with that turbo. If not get the turbo specify on my post. The only problem is the engine beign able to handle it. Good luck and I look forward to see what others have to say who have been running turbo celicas above rated stock output. This post has been edited by west_minist: Feb 10, 2003 - 6:22 PM -------------------- West_Minist
Hydra EMS Dealer & Tuner Subaru ECUFlash Tuner http://www.socob.bb http://xtremeracingtuning.com Viciously Tuned, Driven Hard ![]() |
Supersprynt 5S-FE Turbo Project Feb 10, 2003 - 2:56 PM
Mynzeyes actually, if you think about it, the burien kit is... Feb 10, 2003 - 6:21 PM
west_minist True!
If you can get the kit, whatever it is ... Feb 10, 2003 - 6:31 PM
celicakid84 yea i agree...if i were u id get the burien kit, b... Feb 10, 2003 - 6:43 PM
1bwilson Go the do it your self way. I have and am just ab... Feb 10, 2003 - 7:30 PM
FallenHero $600?! Que?! Feb 11, 2003 - 12:55 AM
hiflytsi Fallen, you took the words... I don't think I ... Feb 11, 2003 - 1:53 AM
1bwilson I have a 91 mr2t turbo manifold 70$
91mr2t do... Feb 11, 2003 - 3:31 AM
Supersprynt So - i pay 2500 and buy the burien which gets me a... Feb 11, 2003 - 3:47 PM
1_Winged_Angel QUOTE (1bwilson @ Feb 11, 2003 - 1:31 AM) I have a... Feb 11, 2003 - 5:19 PM
1bwilson used from www.thepartsteader.com
-Bryan- Feb 12, 2003 - 12:19 AM
FallenHero That's good prices dude. (I was thinking you ... Feb 12, 2003 - 12:43 AM
1bwilson QUOTE (FallenHero @ Feb 11, 2003 - 10:43 PM) That... Feb 12, 2003 - 3:12 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 18th, 2026 - 1:04 PM |