 Indiglo Gauge Problem |
 Apr 9, 2004 - 7:58 PM
|
 
|
 Enthusiast  Joined Aug 13, '03 From Greencastle, PA Currently Offline Reputation: 0 (0%)  |
I just got a set of Indiglo gauges and installed them without taking off the entire needle, just taking off the caps. I used double sided tape and taped down the gauges and whenever i put the caps back one the tach stuck at 3 K and the speedometer wouldn't work at all. Then I popped off the caps to try and they worked fine, but now i have red lights shining through the center where the caps were.
any suggestions on what to do? Thanks |
 |
Replies
|
Apr 9, 2004 - 10:53 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
make sure the dubble sided tape isn't sticking out into the whole where the needles go, cause the caps hangdown lower than the needle and can get stuck on the tape, also make sure that the gauge face is stuck down nice and tight around the needle opening cause if its up even a lil bit the needle will stick
|
Posts in this topic
mjmsoccer Indiglo Gauge Problem Apr 9, 2004 - 7:58 PM
pxcr440 yah the tape might be cause in gto be to high , my... Apr 11, 2004 - 1:05 AM Simmo Have you removed the origianl dials or placed new ... Apr 11, 2004 - 5:44 AM Drocay u can't remove the original dials. Apr 11, 2004 - 3:25 PM mjmsoccer thanks for the help guys, im gonna take the gauges... Apr 11, 2004 - 4:43 PM neophile Hi
You're right, you don't need to take ... Apr 11, 2004 - 6:49 PM
Simmo Hi Guys,
I removed the original dials, which are ... Apr 18, 2004 - 5:07 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 16th, 2025 - 12:26 PM |