 Indiglo Gauge Problem |
 Apr 9, 2004 - 7:58 PM
|
 
|
 Enthusiast  Joined Aug 13, '03 From Greencastle, PA Currently Offline Reputation: 0 (0%)  |
I just got a set of Indiglo gauges and installed them without taking off the entire needle, just taking off the caps. I used double sided tape and taped down the gauges and whenever i put the caps back one the tach stuck at 3 K and the speedometer wouldn't work at all. Then I popped off the caps to try and they worked fine, but now i have red lights shining through the center where the caps were.
any suggestions on what to do? Thanks |
 |
Replies
|
Apr 11, 2004 - 6:49 PM
|
|
 Enthusiast Joined Nov 8, '02 From New Zealand Currently Offline Reputation: 0 (0%) |
Hi
 You're right, you don't need to take off the original gauges - the indiglo's are made to be overlayed over your originals. Take a look at this post from back in february - it might be helpful. --------------------  |
Posts in this topic
mjmsoccer Indiglo Gauge Problem Apr 9, 2004 - 7:58 PM
playr158 make sure the dubble sided tape isn't sticking... Apr 9, 2004 - 10:53 PM pxcr440 yah the tape might be cause in gto be to high , my... Apr 11, 2004 - 1:05 AM Simmo Have you removed the origianl dials or placed new ... Apr 11, 2004 - 5:44 AM Drocay u can't remove the original dials. Apr 11, 2004 - 3:25 PM mjmsoccer thanks for the help guys, im gonna take the gauges... Apr 11, 2004 - 4:43 PM
Simmo Hi Guys,
I removed the original dials, which are ... Apr 18, 2004 - 5:07 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 12:03 PM |