Its Here! Quick picks before I try to install., Blitz Options

[Guest_Jason_*]

Well at 10:40 this morning a truck pulls up and walks to the door and says "Jason?". I'm like "yes??".. being really confused. I was expecting it to come like UPS or not till later this afternoon. So the guy says "I have a car piece for you.", so knowing me I started freaking out, ran upstairs, grabbed my hat, hoody, sweat pants... i'm going to try to install this SOB. Well I don't see any screw holes or anything that stands out on how to Install it, and i've never taken our Bumper off before, so if anyone has any suggestions or ideas on how to do this, please help me.

Here are some pics straight out of the box. The Blitz itself is Fiberglass btw.. Oh and its snowing outside - so I dont know what my cold tolerance is.






This post has been edited by Jason: Feb 10, 2003 - 11:52 AM

[NEVERSTOP]

back to the original ?.. there should be small little circles on the sides of the kit where you wont see it once its mounted.. once you have off your stock front airdamn you will see where its mounted the circles on your blitz AD should be in the same locations other wise you are going to have to put the Blitz AD onto the car with out mountin in.. it should just sit on the car... just dont drive it! newayz once you have it sitting on there use a sharpe marker and make marks where the stock mountin points are and then use a small drill bit to make holes in your blitz AD then try and use the stock mountin hardware to install the AD but you will probably have to go to lowes or some other hardware store and buy small bolts and nuts to install it. If you have ne ?'s ask me as I have put on a buncha front AD and know a few tricks to make it eaiser