![]() |
![]() |
![]() |
|
Enthusiast Joined Sep 5, '02 From Puerto Rico Currently Offline Reputation: 0 (0%) ![]() |
Im finish my 3sgte engine swap intomy 1994 celica at200 with 7afe engine but,I have one very,very,very big problem with the engine wiring harness.I need to know wich engine wiring harness i have to use or wich one I need,I do the swap with the st185 3sgte engine but need help to know if I have to use the wiring harness from the 1853sgte or the one from st2053sgte.WICH ONE.please anybody to help me,let me know
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%) ![]() |
From what i know there is a 3sge adapter harness that you can get to make it a 3sgte. (all plug and play). i think i even noticed it in the parts section of this site b4? not sure though. $400 does seem like a lot to pay for wireing. but if it comes back as pressure 2 says ....then it is worth it. i did my own harness with the diagrams that mike made. (i had to pay for the diagrams and promise not to resell it) Now, i found some things on my harness that were different than what mike had in the diagrams... and had to figure out another way to wire it up. Plus i took the alternator wires and all mian wires from my 5s harness and completely re-ran them in the 3s harness to avoid splicing major power wires!!!!
If any of you guys plan on doing it yourself it will take you 3 days to do it! full weekend job. I am not the kind of person to give away all of mikes secrets for wireing, but if you guys have problems i will try to help you figure it out! DG -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: June 4th, 2025 - 1:44 PM |