6G Celicas Forums

Welcome Guest ( Log In | Register )

> LAMBO Doors, Any kits made JUST for our car?
post May 4, 2004 - 3:06 PM
+Quote Post
Guest_DJMC_Celica_*











Ok,

I challenge any of you to do a search on lambo doors, and the only cars that comes up is.....CIVIC OR ECLIPSE!!! uggghhhhh mad.gif . This pisses me off. OK are our cars not good enough to be Lambo'ed? The only kits for our cars are universal, which cost $1,499 - $1,999. The look at a civic and they are $999-1,099. I must say i am not happy about this! Anyways are cars should have more parts made, i mean everyone and theire cousin owns a civic, and eclipses. So if anyone knows a place for "CHEAP LAMBO DOORS" IM or PM me!!!

Thanks,
DJMC

THIS IS WHAT SHOULD BE DONE WITH EVERY CIVIC!!!
user posted image
 
Start new topic
Replies
post May 4, 2004 - 3:34 PM
+Quote Post
madmods



Enthusiast
*****
Joined Mar 19, '04
From Scottsdale, Az
Currently Offline

Reputation: 2 (100%)




They do make them now for 7th gen 2000-2004. I got latches for the civic which I was going to mod these when time permits. I know I stated this before. My main problem is Im new to my celica, and i have been plagued with little problems, I have been working out. Example, I just got it and then one rear window went out, 3 days later the other one. It started raining the same day. Next my motor for my top went out. I have been buying everything on ebay, because the dealer is a straight rip-off. Previous owner yanked the amp and alarm brain out of the vehicle, not to mention the full soda they spilled under the shifter which landed on the previous alarm radar sensor. Ok Ill quit boring you guys. Last week I installed a viper alarm and installed the amps and processor unit. This weekend i dropped it with coils and put on the slotted brake discs and new pads all the way around. Im ready for the body kit, and since i got some different fenders I will be able to remove them and answer the question is it possible to fit decahs lambo door latches on the celica. I fitted these before on another car, so I got some experience in what works an dont. The main problem I see, is that the mounting surface has to be flat, if not use got to slice with a cutting wheel and hammer flat.
ill keep you guys tuned to results.

Posts in this topic
- DJMC_Celica   LAMBO Doors   May 4, 2004 - 3:06 PM
- - Phat_99CeliGT   QUOTE (DJMC_Celica @ May 4, 2004 - 1:06 PM) The lo...   May 4, 2004 - 3:19 PM
- - Coomer   QUOTE (DJMC_Celica @ May 4, 2004 - 1:06 PM) i...   May 4, 2004 - 3:24 PM
- - madmods   They do make them now for 7th gen 2000-2004. I got...   May 4, 2004 - 3:34 PM
- - NEVERSTOP   hasn't this been posted before???? Oh yea t...   May 4, 2004 - 10:16 PM
- - DJMC_Celica   ill take that bet!!! I am going to ord...   May 4, 2004 - 10:33 PM
- - NEVERSTOP   QUOTE ill take that bet!!! I am going ...   May 4, 2004 - 10:41 PM
- - celicarocker   QUOTE (NEVERSTOP @ May 4, 2004 - 11:41 PM) QUOTE i...   May 4, 2004 - 10:59 PM
- - FAQdaWorld   I seem to recall someone iming me and asking if i...   May 4, 2004 - 11:14 PM
- - DJMC_Celica   id be down on that group buy   May 4, 2004 - 11:57 PM
- - StrangerDanger   thats a nice civic... dont like the rims, but sti...   May 5, 2004 - 12:20 AM
- - Clipsetuner   It was me asking around to see what kinda intrest ...   May 5, 2004 - 12:37 AM
- - Tweek   I saw a guy on EBAY selling CAD specs for a lambo ...   May 5, 2004 - 1:10 AM
- - neoklis   QUOTE (NEVERSTOP @ May 5, 2004 - 3:41 AM) Oh yea b...   May 5, 2004 - 2:24 AM
- - Nigel   Civics may have more power but celica are sexy civ...   May 5, 2004 - 6:18 AM
- - DJMC_Celica   QUOTE (Nigel @ May 5, 2004 - 11:18 AM) Civics may ...   May 5, 2004 - 7:26 AM
- - turboinduction   I found a corp that will make 94-99 Celica vertica...   May 5, 2004 - 9:00 AM
- - neoklis   Which company is that? Do you know if their produc...   May 5, 2004 - 9:03 AM
- - turboinduction   Well sorry guys... looks like my company was a fra...   May 5, 2004 - 9:10 AM
- - NEVERSTOP   QUOTE thats a nice civic... dont like the rims, bu...   May 5, 2004 - 11:59 AM
- - Nigel   I have seached around Go to www.ebay.com and type...   May 5, 2004 - 12:16 PM
- - BlackCelicaGT94   i was gonna do lambo doors but i was gonna get min...   May 5, 2004 - 3:25 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 26th, 2025 - 3:52 PM